Notes for the use of popular products (for reference only, please refer to the instructions for details)
The external power supply of all products must be safely grounded.
Reference for testing machine for oil change (all use of mechanical oil)
Since the temperature is slightly different from the testing machine, the oil specifications are recommended as follows:
A) when the environment temperature for 15 + / - 5 ℃, the proposal USES machine oil n68 GB443-84 (no. 40 machine oil).
B) when the ambient temperature of 25 + 5 ℃, the proposal USES machine oil n100 GB443-84 (50 # machine oil).
There is a slightly different oil product name, please check some oil name comparison table.
Zs-15 cement sand vibrator platform.
Before operation, the positioning sleeve should be removed to check whether the moving parts are moving freely, whether the electric control part is normal, and when the lubricating oil is added, the machine should be switched on, and all normal functions can be used. The positioning sleeve must be removed before each use. After use, the equipment should be cleaned with various sundries, and the positioning sleeve should be placed in place, so as not to affect the center position.
Jj-5 cement sand mixer.
Do not drive the anti - car, easy to cause blade, shaft fracture. Should keep the work site clean, after each use, should thoroughly remove the stirring leaves and stirring the residual mortar inside and outside, wipe dry and cover. The moving parts should be added with butter once a season, and the cover can be opened when refueling. Maintain once a year, clean the machine and add lubricating oil and grease. To gently handle the skillet, do not collide with each other, so as to avoid the deformation of the stirring pot.
NYL-300D type pressure testing machine.
Please do not install a non-genuine software or an unknown floppy disk or CD in a random computer, so as not to infect the virus, causing the stress test machine to be damaged or have more serious consequences.
Customer service hotline:
If you have any complaints about our products or services, please call us at 0510-88275668 or fax: 0510-88275118.